Plastic Tube For Cosmetic With Pump Cap

Custom design available,OEM/ODM welcomed !

        The normal round tube, oval tube and super flat tube are available here, diameter ranges from 16mm, 19mm, 22mm, 25mm, 30mm, 35mm, 40mm, 45mm, to 50mm, with the capacity 5ml to 300ml accordingly. Our tubes mainly used for shampoo, shower gel, body lotion, conditioner, tooth paste, shaving cream, eye cream, lipstick, mascara, hand cream, facial milk, facial cream, body lotion, chemical oil and some food packaging, etc. Should you have any questions or needs, please contact us freely, we will take every effort to offer you the best service.

Packaging and shipping

   cosmetic tubes packed in tray first, then put in outer carton, details see below photos.

Standard export carton box size :60*45*46.

Pallet size :130*120

Hot Products

The following are our new products

 PE tube MOQ 10000PCS 

 ABL tube MOQ 20000PCS

                        Tube diameter and printing according to customer equirements.

Pay attention to these six aspects, chromatic aberration problem can also become very simple!

chromatic aberration

Color difference refers to the difference in color. In daily life, we often say the color difference refers to the phenomenon of color inconsistency when people observe products. For example, in the printing industry, the color difference between printed products and standard samples provided by customers.

1 Color matching

Printing color matching is the core content of the whole color difference adjustment. Usually, many printing technicians in enterprises only pay attention to experience or their own feelings in color matching, which is neither standard nor unified standard. They just stay in a very primitive color matching state, which is very casual. On the one hand, it has no effect on the improvement of color difference, on the other hand, it is difficult to adjust the hue. Third, there is no proper skill to shape the color matching ability of employees.

2 Printing scraper

The influence of the printing ink scraper on the color difference if the scraper is often moved in the production and processing, the working position of the scraper will be changed, which is not conducive to the normal transfer of printing ink and color reproduction. In addition, the pressure of the scraper can not be changed at will.

3 Adjustment of viscosity

Before production and processing, we should strengthen the adjustment of viscosity, preferably according to the expected machine speed. After adding the solvent, we should wait for 10 minutes to fully ring, and then start production and processing. When the finished product meets the quality awareness standard, the viscosity can be detected as the unified standard viscosity value of the product. This value should be recorded immediately and accurately, and the whole product should be adjusted according to the data, which can reasonably reduce the hue deviation caused by the viscosity change. Viscosity detection should pay special attention to the detection skills. Usually, the printing ink in the printing ink bucket or printing ink basin is the main detection body. Before detection, the No. 3 viscosity cup must be cleaned to facilitate accurate detection.

4 production environment

The air humidity of the workshop is adjusted to 55% - 65% under normal conditions.Too high humidity will affect the solubility of printing ink, especially the transfer of shallow screen area is difficult to show. Reasonable adjustment of air humidity can improve the printing effect and color difference.

5 raw material

Whether the surface tension of raw materials is qualified or not affects the wetting and transfer effect of printing ink on the substrate, as well as the color display effect of printing ink on the film, which is also one of the factors affecting the color difference. Ensuring the product quality of raw materials is the prerequisite of quality control. It is very important to select qualified suppliers!

6 Quality consciousness

Refers to the production and processing and quality management personnel on the product quality of a perception. This perception must be obvious and be reflected in the details of the work. Then, in terms of adjusting the color difference, it is mainly to guide the staff to improve their quality awareness, keep improving in their work, and shape the product quality concept. For example, when proofing, they should strictly abide by the standard sample and reach more than 90%, then they can start production and processing, and assist the quality inspectors to strengthen the inspection work of the first piece. In the production and processing, the team members are strictly required to perform the quality management system. In the production and processing, if the printing ink hue is changed, special attention should be paid to the cleaning details of the printing ink basin. In addition, special attention should be paid to whether the bottom plate of the ink scraper and the clamping strips at both ends are replaced or cleaned. If these small details are not paid special attention in the production and processing, the color mixing between the hues will occur It causes color change and color difference.

FAQ

1. how can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment;

2.what can you buy from us?

Cosmetic plastic tube,cosmetic aluminum laminated tube,cosmetic plastic cap,cosmetic bottle,cosmetic jar

3.what services can we provide?

Accepted Delivery Terms: FOB,CIF,EXW；
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,MoneyGram,Credit Card,Western Union,Cash;
Language Spoken:English,Chinese