1. Bottles (including plastic bottles and glass bottles
(1) The bottle body is complete, stable and straight, smooth, basically uniform in thickness, free of cold bursts, cracks, and no obvious scars or deformation.
(2) The bottle mouth is straight and smooth, without burrs (burrs), and the thread and other matching structures are intact and straight.
(3) The inside and outside of the bottle are clean.
(4) The bottle and the cap are tightly matched without slipping teeth, loosening and leakage.
2. Cover (including outer cover, inner cover (plug, pad))
(1) Inner cover
①Complete, smooth, no deformation, clean, no dust, oil, etc.
②It fits well with the bottle and outer cap, and should not leak out.
(2) Outer cover
①Correct, smooth, no broken, cracked, burr (burr) and burst phenomenon, uniform color, no color migration, consistent with the standard sample.
②The thread and other matching structures are intact.
③The ones with anodized aluminum or bronzing should be uniform and complete, and the color should be consistent with the standard sample.
④The outer cover of the clamshell type can be turned up flexibly.
⑤The cap and the bottle are tightly matched, and there is no slippage, loosening, leakage, etc.
3. Bags (including paper bags, plastic bags, composite bags)
VI Design Packaging Box Design Planning Company Packaging Machine Food Packaging Commercial Photography CI Design Product Packaging Design
(1) There should be no wrinkles, scratches, air bubbles, and the color is consistent with the standard sample.
(2) The seal should be firm and correct, and there should be no openings, perforations, leakage of paste (liquid), etc.
(3) The composite bag is firm and evenly coated.
4. Hose
(1) The tube body is smooth, clean, uniform in thickness, without obvious scratches, and the color is consistent with the standard sample.
(2) The seal should be firm, without openings, wrinkles, etc.
(3) The cover should meet the requirements of 2.2.
5. Box (including cartons, plastic boxes, iron boxes)
(1) The surface of the box is smooth and straight without obvious scratches and burrs (burrs). The color is uniform and consistent with the standard sample.
(2) The opening tightness is appropriate and meets the 3.2 test requirements.
(3) The mirror surface and the contents in the box are firmly bonded to the box, and the mirror image is good. There is no scratches and damage to the bottom.
6. Spray can
(1) The tank body is flat, no rust spots, smooth welds, no obvious scratches on the main parts, and uniform color, which is consistent with the standard sample.
(2) The roll mouth is smooth and free of cracks and deformation.
(3) The cover should meet the requirements of 2.2.
7. Ingot tube (including lipstick tube and foundation tube)
(1) The tube body is straight and smooth, without obvious scratches, and the color is uniform, consistent with the standard sample.
(2) The tube body is suitable for tightness, and the paste should be screwed out or pushed out normally.
8. Cosmetic pencil
(1) The pen barrel should be smooth and straight, the pen barrel should not be glued, and the paint should not crack.
(2) The surface of the pen cover is smooth and clean, and the elasticity is suitable.
(3) The logo should be complete and clear.
9. Trademarks, manuals, box stickers and certificates
(1) Printed trademarks should have correct patterns, distinct colors, and clear and firm writing.
(2) The trademark must be firmly pasted, and must not be skewed, missed, inverted, or wrongly pasted. After being pasted, the corners and edges will not be warped.
(3) The printing pattern of the manual is clean and the handwriting is clear.
(4) Printed writing and patterns on the box head (sticking) are clear.
(5) The printed handwriting and pattern of the certificate are clear, and there are signs such as factory name and inspector code.
10. Outer box packaging (including flower box, medium box, large box)
(1) Flower box
①The flower box should be tightly matched with the medium box packaging.
②The flower box should be clean, upright, flat, free of wrinkles, missing edges, or missing corners.
③The bonding parts of the flower box are firmly bonded, without sticking marks, cracks and mutual adhesion, and the color is uniform, consistent with the standard sample.
④ The product has no wrong installation, missing installation, or upside-down installation. The lid is closed.
⑤The flower box of the product (including product packaging) should indicate the product's trademark, product name, factory name, factory address, production date (shelf life), capacity or quality, license number, and instructions for use if necessary.
(2) Medium box
①The middle box should be clean, upright and flat.
②The product has no wrong installation, missing installation, or upside-down installation.
③The box head (sticker) should be correct, clear, and complete, and should be marked with product name, quantity, and factory name.
(3) Big box
① The large box should be clean, upright, smooth, and tightly sealed.
②The product has no wrong installation, missing installation, or upside-down installation.
③The signs outside the big box should be clear, complete, and in an appropriate location, with signs such as product name, factory name, factory address, license number, specification, quantity, gross weight, volume, factory date, and precautions.
11. Other
(1) Pump spray cans shall meet the corresponding requirements in 6.1-3.
(2) The shelf life of the product is marked, and the product quality for more than three years without problems can not be marked.
(3) The implemented standard number should be marked on the product or its instructions and packaging.
